embedded device server easily network-enable virtually any serial device flexible, well-developed ip protocol stack ethernet rj45 (10base-t) connector on the board ttl serial interface two serial ports accepts 5v dc regulated input power http, serial, telnet and snmp management flash rom for easy software upgrades custom protocol support available building ethernet connectivity into a product is no simple task. it requires a significant investment in hardware and software integration C often in areas outside of core competencies. so why build it yourself when there is a cost-effective alternative? lantronix embedded device networking products provide proven, integrated hardware and software solutions for manufacturers who want to add ethernet connectivity to their products. device networking starts with a device server ? . these amazing products allow most any device with a serial port (ttl) to connect to ethernet networks quickly and cost-effectively. device servers include all of the elements needed for device networking a processor, real-time operating system (rtos), a robust tcp/ip stack, a web server and a network connection. all the connected product needs is a header, providing connections to power and a ttl serial port. the micro brings over a decade of networking experience, rock-solid ip firmware and extensive applications support to industrial and commercial environments. measuring only 1.6 in x 1.9 in, the micro can easily fit into almost any size serial device that would benefit from network connectivity. a ttl connector provides the serial interface, and an rj45 (10base-t) is available for ethernet access. the micro includes the same ip protocol stack found on the other lantronix products. the lantronix micro is a board-level product for oem users who want to embed proven mainstream ethernet connectivity into their products quickly and economically. design ethernet connectivity into your products quickly and economically embedded device server ? micro
embedded device server ? micro 15353 barranca parkway | irvine | ca 92618 | usa | tel: 800.526.8764 | fax: 949.450.7249 | www.lantronix.com ?2006, lantronix, inc. lantronix is a registered trademark and device server is a trademark of lantronix, inc. all other tradem arks are the property of their respective owners. specifications subject to change without notice. all rights reserved. 910-300 05/06 dgs2500 features protocols arp, udp, tcp, telnet, icmp, snmp, dhcp, tftp and http networking interface rj45 (10base-t) ethernet serial interface ttl level (asynchronous) data rates 300 bps to 115.2 kbps serial line formats characters: 7 or 8 data bits stop bits: 1 or 2 parity: odd, even, none modem controls dtr, rts, cts, dcd flow control xon/xoff (software) cts/rts (hardware) management http snmp serial login telnet login system software flash rom standard: downloadable from a tcp/ip host (tftp) or over serial port diagnostic leds transmit data receive data good link compatibility ethernet: version 2.0/ieee 802.3 power requirements 5v dc +/-5% at ~ 200ma memory flash: 512k ram: 128k nvram: 2k bytes environmental standard temperature 0 to 70 c (32 to 158 f) storage temperature -40 to 85 c (-40 to 185 f) physical dimensions (l x w) 49.15 x 40 mm (1.935 x 1.575 in) mechanical drawing available at www.lantronix.com warranty 1-year limited warranty board layout and pinouts con2 (rj45) pin con1 1tx+ 2tx- 3rx+ 4nc 5nc 6rx- 7nc 8nc con4 (2 x 4 pins in place of leds) pin function 1 +5v 2 +5v 3 led2 4 led1 5 +5v 6 +5v 7 led3 8 led good link ordering information contact your local lantronix representative or lantronix directly: united states sales@lantronix.com or call oem sales support at 800-526-8764. asia pacific region asiapacific_sales@lantronix.com europe eu_sales@lantronix.com japan japan_sales@lantronix.com latin america & caribbean la_sales@lantronix.com part number and description co-e1-00aar micro with no rj45 and leds, rohs co-e1-11aar micro device server, ethernet, rohs co-e1-iap-r micro industrial protocol, rohs CO-E1M-00AAR micro with no rj45 and leds, with modbus firmware, rohs co-e1m-11aar micro with modbus firmware, rohs co-e2-00ab-r micro generic, 2 serial port support with no rj45 and leds, rohs co-e2-113aar micro, 2 serial port support and ttl header on back of board, rohs co-e2-11aar micro with 2 serial port support, rohs co-e2-12aa-r micro with no leds, but instead, header pins on the ttl side, rohs co-e2-21abr micro, pin header on ttl side instead of rj45, rohs co-e2-22aar micro with 2 ttl channels, rohs co-e2-22ab-r micro with 2ttl channel, rohs co-e2-iapr micro 2 channel iap, rohs con3 (2 x 2 pins in place of rj45) pin function 1tx+ 2tx- 3rx+ 4rx- drill 1 drill 3 rj45 (con2) ttl (con1) drill 2 1 3 5 7 9 11 leds (con 4) reset switch con1 (2 x 6 p ins) pin function 1 +5v 2 gnd 3 rxa (input) 4 txa (output) 5 rtsa (output) 6 dtra (output) 7 ctsa (input) 8 dcda (input) 9 r/v/a (output) 10 reset to be pulled low 11 rxb (input ?optional) 12 txb (output ?optional)
|
